The S7000 is the largest control Surface in the dLive family, with a whopping 216 assignable fader strips. It features 36 faders over 6 layers, dual 12″ capacitive touchscreens and the innovative Harmony UI for the fastest workflow in the industry.
* MPS16 power consumption is printed under AC inlet | |
ADC | 24-bit Delta-Sigma |
DAC | 24-bit Delta-Sigma |
Pad | -20dB Active PAD |
INPUTS | |
S7000: | |
SYSTEM | |
Latency | 0.7 ms (MixRack XLR in to XLR out, Input to Mix) |
Mic EIN | -127dB with 150Ω source |
OUTPUTS | |
Headroom | +18dB |
Fitted with: | |
Analogue Gain | +5 to +60dB, 1dB steps |
MPS16 V1 300w | 0°C to 35°C (32°F to 95°F) |
MPS16 V2 250w | 0°C to 40°C (32°F to 104°F) |
Sampling Rate | 96kHz +/- 20 PPM |
Digital Inputs | AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω |
Dynamic Range | 110dB |
S7000 - boxed: | |
dBFS Alignment | +18dBu = 0dBFS (+22dBu at XLR output) |
Digital Outputs | AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω |
Input Impedance | >4kΩ (Pad out), >10kΩ (Pad in) |
Mic/Line Preamp | Fully recallable |
Nominal Output | +4dBu = 0dB meter reading |
Output Impedance | <75Ω |
Input Sensitivity | -60 to +15dBu |
Meter Calibration | 0dB meter = -18dBFS (+4dBu at XLR out) |
Frequency Response | 20Hz - 30kHz +0/-0.8dB |
Maximum Input Level | +30dBu (PAD in) |
Mic/Line XLR Inputs | Balanced XLR, +48V phantom power |
Analogue XLR Outputs | Balanced, Relay protected |
DIMENSIONS & WEIGHTS | |
Maximum Output Level | +22dBu |
Meter Peak indication | -3dBFS (+19dBu at XLR out) |
Residual Output Noise | -92dBu (muted, 20-20kHz) |
System Signal to Noise | -92dB |
Mains Power Consumption | 300W max (MPS16 V1 300W)* |
Phantom Power indication | Per socket, internal or external phantom power sensing, triggered at 24V |
Internal Operating Level | 0dBu |
THD+N (analogue in to out) | 0.0015% @ +16dBu output, 1kHz 0dB gain |
Operating Temperature Range | |
Mains Voltage Operating Range | 100-240V AC, 50/60Hz |
Width x Depth x Height x Weight | 1485 x 920 x 560 mm (58.5"x 36.2"x 22") x 56kg (123.5lbs) |