Penguin Media Solutions

Featuring eight HDBaseT™ 1.x input ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant third party transmitters. The HDBaseT™ technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters.

The A3 add-on has bi-directional and configurable S/PDIF connectors. 2-channel LPCM or various IEC-61937 audio formats embedded in the HDMI input or from the Return Audio Layer can be switched to the S/PDIF output. Furthermore, audio through the S/PDIF input can be embedded into the HDMI signal or can be routed to the Forward Audio Layer.

Supported Media Layers

Video layer with embedded audio
Forward Audio Layer
Return Audio Layer
Ethernet layer
USB KVM layer
Infra layer
Consumer Electronics Control layer
RS-232 & RS-422 control layer

1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
Built-in PoE injector* for remote powering extenders
Audio de-embedding
Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
Optional digital or analog audio embedding and de-embedding add-ons
Audio embedding and de-embedding
Adjustable analog audio settings (volume, gain, balance)
Optional digital or analog audio embedding and de-embedding add-ons
Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
Frame Detector (analyse detailed video timings)
5-pole Phoenix balanced analog audio connectors
Built-in PoE power injector* for remote powering extenders
TPS link quality and cable length monitoring
HDCP enable/disable function on input
Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
HDBaseT compatible
Ethernet extension (100 Mbps)
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
Advanced EDID Management
Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
Supports deep colour signals (24/30/36 bit RGB/YCbCr 4:4:4)
Pixel Accurate Reclocking
Bi-directional RS-232 extension (pass-through)
HDCP 1.4 compliant
Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Built-in video test pattern generator
No signal latency, zero frame delay

Hdcp Compliancy	1.4
Hdbaset™ Compliance	1.4
Max Resolution	4K / UHD (30Hz RGB or YCbCr 4:4:4, 60Hz YCbCr 4:2:0), 1080p@60Hz, 720p/1080i@120Hz
Supported Audio Formats	HDMI audio according to the Audio switching matrix section
3D Signal Compatibility	Frame packing, side-by-side, top-bottom
Input Cable Equalization	Up to 170 meters according to the maximum cable lengths section
Hdbaset™ Connectors	8 x RJ45
Audio Connectors	8 x 5-pole Phoenix type
Poe Compliance	IEEE 802.3af-2003 with output power of 25.5W

Sales > Lightware > Matrices & Switchers > 25G-8TPS2-A3P1-IB

25G-8TPS2-A3P1-IB

25G-8TPS2-A3P1-IB

Pages