Penguin Media Solutions

Featuring eight HDBaseT™ 1.x output ports, the board is compatible with the full range of Lightware TPS extenders and HDBaseT™ compliant 3rd party transmitters. The HDBaseT™ technology provides a transparent medium for all video, audio, data and control signals in line with the 25G multilayer architecture and allows for a cost effective extension solution for up to 170 meters.

The A3 add on has bi directional configurable Phoenix connectors. The digitized audio from the add on can be embedded either to the output HDMI signal or to the Return Audio Layer. Moreover, IEC 60958 1 audio either from the HDMI signal or the Forward Audio Layer can be routed to the add on output.

The board provides remote powering for extenders according to the PoE specification (IEEE 802.3af-2003) but with increased output power of 25.4W. Remote powering does not require an external power source other than that of the 25G matrix switcher.

Supported Media Layers

Video layer with embedded audio
Forward Audio Layer
Return Audio Layer
Ethernet layer
USB KVM layer
Infra layer
Consumer Electronics Control layer
RS-232 & RS-422 control layer

1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
Built-in PoE injector* for remote powering extenders
Audio de-embedding
Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
Optional digital or analog audio embedding and de-embedding add-ons
Audio embedding and de-embedding
Adjustable analog audio settings (volume, gain, balance)
Optional digital or analog audio embedding and de-embedding add-ons
Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
Frame Detector (analyse detailed video timings)
5-pole Phoenix balanced analog audio connectors
Built-in PoE power injector* for remote powering extenders
TPS link quality and cable length monitoring
Bidirectional balanced analog stereo audio ports with 5-pole Phoenix connector
HDBaseT compatible
Ethernet extension (100 Mbps)
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
Advanced EDID Management
Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
Supports deep colour signals (24/30/36 bit RGB/YCbCr 4:4:4)
Pixel Accurate Reclocking
Bi-directional RS-232 extension (pass-through)
HDCP 1.4 compliant
Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Built-in video test pattern generator
No signal latency, zero frame delay

Hdcp Compliancy	1.x
Hdbaset™ Compliance	1.x
Max Resolution	4K / UHD (30Hz RGB or YCbCr 4:4:4, 60Hz YCbCr 4:2:0), 1080p@60Hz, 720p/1080i@120Hz
Supported Audio Formats	HDMI audio according to the Audio switching matrix section
3D Signal Compatibility	Frame packing, side-by-side, top-bottom
Input Cable Equalization	Up to 170 meters according to the maximum cable lengths section
Hdbaset™ Connectors	8 x RJ45
Audio Connectors	8 x 5-pole Phoenix type
Poe Compliance	IEEE 802.3af-2003 with output power of 25.5W

Sales > Lightware > Matrices & Switchers > 25G-8TPS2-A3P1-OB

25G-8TPS2-A3P1-OB

25G-8TPS2-A3P1-OB

Pages