Sales > Lightware > Matrices & Switchers > MX8x8DVI-PRO

MX8x8DVI-PRO

Pro Series DVI Switcher

MX8x8DVI‑Pro is a cost effective solution for routing DVI signals on eight input / eight output.

MX8x8DVI-PRO

Pro Series DVI Switcher

MX8x8DVI‑Pro is a cost effective solution for routing DVI signals on eight input / eight output.

View more products in the Matrices & Switchers range

Specifications

Inputs	8x DVI-D single link
Bit Rate	1.65 Gbit/colour
Resolution	Any between 640x480 to 1920x1200 including HDTV resolutions: 720p, 1080i, 1080p, 2K 2048x1080
Edid Termination	at each input
Equalization	Automatic, max 40dB@ 825 MHz (1.65 Gb/s) on each input
Edid	100 memories, 50 user programmable
Lan	TCP/IP Ethernet 10Base-T or 100Base TX (Auto-Sensing)
Outputs	8 DVI-D single link
Reclocking	PLL reclocking on each output
Power	100 - 240V 50/60Hz 1.8 - 1.0 A
Power Consumption	23 W (typ), 31 W (max)
Heat Dissipation	79 BTU (typ), 106 BTU (max)
Dimensions	446 (482)W x 303D x 43,9H mm
Weight	4500g
Compliance	CE
Warranty	3 years
Connectors
Inputs	8x24 pole DVI-D connector
Output	8 or 4x24 pole DVI-D connector
Lan	RJ45
Rs-232 Or 422	9p sub D female

Description

Lightware MX8x8DVI-Pro is an eight input eight output DVI matrix router, switching all DVI-D resolutions from 640x480 @ 60Hz to 1920 x 1200 including all HDTV resolutions: 720p, 1080i, 1080p, 2048 x1080. All inputs have a unique cable equalization circuit which allows using up to 50 meter cable. All outputs have 500 mA power on DVI +5V pin to power fibre optical DVI cables.

MX8x8DVI-Pro contains an Advanced EDID Management system. The user can emulate any EDID on the switcher's inputs independently, read out and store any attached monitor's EDID in 100 internal memory locations, upload and download EDID files using Remote Control Software. EDID is a monitor identification data, that determines for the connected computer it's native pixel resolution and refresh rates.

The DVI crosspoint switcher can be controlled through 9 pole D-sub connector via RS-232 or RS-422 protocol, and IP based Ethernet connection including web access.

Features

Status LED for video signal detection
High power DVI 5V output (for fiber adapters, etc)
Directly mountable in 19" rack
Built-in universal power supply
Input cable equalization up to 50m at 1080p60Hz (with 24 AWG high quality DVI/HDMI cable)
Vista Spyder and Barco Encore compatibility
Supports all VESA and HDTV resolutions
Device control via Ethernet (TCP/IP) and RS-232
Advanced EDID Management (50 Factory presets, 50 user programmable slots)
Advanced EDID Management
Save and reload full crosspoint configurations as preset
Intuitive control software for device configuration
Front panel buttons for crosspoint control
Device control via RS-232
Device control via Ethernet (TCP/IP)
Fully non-blocking switching architecture
Pixel Accurate Reclocking
No video compression
No signal latency, zero frame delay

Related Resources

MX8x8DVI-Pro_product_brief

Description

Features

Specification

Related Resources

Pages

The Institute of Sound, Communications & Visual Engineers | ISCVE