Amplification, networking and DSP are all housed in MLA Mini’s companion MSX Power Plant, which includes 9 channels of Class D amplification – 1 channel for itself, and 8 channels to provide cellular drive of up to 4 bi-amped MLA Mini enclosures. Crossover, delay and EQ functions are implemented by a combination of IIR and FIR filters.
Acoustical | |
Type | 15” reflex loaded subwoofer |
Frequency Response | 50Hz-150Hz ± 3dB -10dB @ 42Hz |
Maximum Spl @ 1M | 133dB continuous, 136dB peak |
Driver | |
Rated Power | |
Msx Dispersion | |
Audio Input | |
Connectors | Female XLR input, male XLR link output |
Analogue Input Impedance | 20kΩ balanced to ground |
Maximum Analogue Input Level | 6.15Vrms (+18dBu), over voltage protected |
Aes/Ebu Impedance | 110Ω balanced, receive and transmit termination |
Internal Processing | |
Network | |
Connectors | IP68 rated 8-way, quick-release type |
Protocol | U-NET |
Amplifier Module | |
Type | 9 channel switch-mode, class D |
Peak Output Power | 7000W total 1400W MSX (or alternative 4 Ohm subwoofer) 700W MLA Mini LF x 4 700W MLA Mini HF x 4 |
Connectors | 2 x NL8 outputs to MLA Mini x 4 |
Average Efficiency | 85% |
Cooling | 2 x temperature controlled internal fans 1 x low-speed internal blower 2 x temperature controlled external fans |
Maximum Ambient Temperature | 45°C (113°F) for full output |
Power Supply | |
Type | Switch mode, fixed frequency with PFC |
Ac Input Operating Range | 100 – 240V ~ AC, 50 – 60Hz |
Power Factor | > 0.95 |
Consumption | 900W |
Mains Connector | Neutrik® Powercon True1 |
General | |
Enclosure | Extensively braced multi-laminate birch-ply |
Finish | Textured black PU coating |
Protective Grille | Black HEX perforated steel |
Fittings | Two skids on base, with mating channels on top M20 top-mounted thread plate for MLA Mini pole Integral flyware for suspension of up to 4 MSX Large bar handle on each side Two front-mounted latch plates for wheelboard Optional weather protection cowl |
Ip Rating | Indoor (without weather protection cowl) IP 25 (with weather protection cowl) |
Dimensions | (W) 500mm x (H) 510mm x (D) 575mm (675mm with vent flap open) (W) 19.7in x (H) 20.1in x (D) 22.6in (26.6in) |
Weight (Ex. Wheel-Board) | 58kg (128lbs) 65kg (143lbs) inc wheelboard |