Four channels of balanced, line-level analog output for interfacing between Q-SYS™ and outboard equipment such as non-DataPort amplifiers, recording devices and teleconference systems.
Four channels of balanced, line-level analog output for interfacing between Q-SYS™ and outboard equipment such as non-DataPort amplifiers, recording devices and teleconference systems.
Description | Line Output Four channels of balanced, line-level analog output |
Performance | |
Dynamic Range Unweighted | > 112 dB |
Dynamic Range A-Weighted | > 115 dB |
Distortion 20 Hz–20 Khz +4 Dbu (Nominal Input) | - |
Distortion 20 Hz–20 Khz 2 Db Below Clip (Max) | < 0.004% THD+N |
Crosstalk 20 Hz - 20 Khz | |
Inter-Channel (Max) | > 100 dB |
Inter-Channel (Typ) | > 110 dB |
Intra-Channel (Max) | > 100 dB |
Intra-Channel (Typ) | > 110 dB |
Frequency Response | |
20 Hz–20 Khz (Max) | ± 0.5 dB |
20 Hz–20 Khz (Typ) | ± 0.2 dB |
Input Impedance Balanced (Nominal) Unbalanced (Nominal) | - |
Common Mode Rejection 20 Hz–20 Khz (Max) 20 Hz–20 Khz (Typ) | - |
Max Input Level | - |
Mute | Infinite attenuation (via electro-mechanical relays) |
Audio Conversion | |
Analog To Digital Conversion (Adcs) | - |
Digital To Analog Conversion (Dacs) | 24-bit delta-sigma at 48 or 96 kHz sample rate |
Group Delay | < 10 samples (≈ 196 μs) at 48 kHz |
Connectors | Four 3-terminal Euro-style detachable terminal blocks |
User-Configurable Options (Software Enabled) | |
Phantom Power | - |
Output Trim | |
V Rms (Max) | 8.7 V |
Dbu (Max) | 21 dBu |
Dbv (Max) | 18.8 dBv |
Amplifier Standby | Set or clear amplifier in standby mode |
Mute | Set or clear individual channel mutes |
Enable Meters | Enable data collection of meters for each channel |
Audio Output Levels | Adjust individual audio channel levels |
Amplifier Model Support | CX, PowerLight™ 3 Series, DCA, and legacy V1 models |