Penguin Media Solutions

Flex Channels: 8 software definable flex channels (mic/line input w/ phantom power, or line level output). Single channel granularity allows the user to configure any combination of inputs / outputs from 8 x 0 through to 0 x 8.
Microphone Fault Detection: When used as mic/line inputs.
Audio-to-USB Bridging: For situations where laptop PC’s are being used for soft codec conferencing using applications such as Skype for Business™ , GoToMeeting™, etc., the onboard USB Device port can be used to provide USB-to-Audio Bridging direct to the PC via driverless USB connectivity.
External Device Control: Control and interface with external devices using TCP/IP, RS232 and GPIO.
PoE+ Capability: For single cable installation. External 24VDC PSU can be used for redundancy (not sold by QSC)
Redundancy: Offers dual network ports for redundancy with the ability to send and receive on both ports simultaneously for glitch-free switchover the event of a network failure.
Mounting Accessories included: Class leading mounting accessories offer multiple rackmount and under-table mounting options.

Inputs/Outputs
Audio Flex Channel Capacity	8
Audio Flex Channel Assignments	Each channel can be configured as a mic/line input or as a line output (configured through Q-SYS Designer software)
Rear Panel Indicators	“Link”, “Speed” and “Activity” LEDs on all LAN ports
Usb Inputs & Outputs
Usb Audio Bridging	Up to 8×8 channels of digital audio in/out via software definable USB instances advertised to the USB Host operating system
Usb B (Device Port):	Bit depth: 16-bit, 24-bit (configured in Q-SYS Designer software) USB Channel Capacity: 8×8 Sample Rate: 48kHz
Controls
Front Panel Controls	“NEXT” OLED page forward capacitive touch button “ID” device identification capacitive touch button “Clear Network Settings” - invoked when “NEXT” and “ID” are pressed simultaneously
Front Panel Connectors	AUX USB: USB Host × 2 (Type A connectors)
Rear Panel Connectors	Audio Flex I/O: 12-pos blue Euro Block × 2 GPIO: 10-pos black Euro Block × 2 (GPI = 1x10, GPO = 1x10) RS232: 3-pos black Euro Block AUX USB Host: USB Host × 2 (Type A connectors) AUX USB Device: USB Device Port (Type B connector) Media Network LAN A/PoE+ Power In : RJ45 1000 Mbps Media Network LAN B: RJ45 1000 Mbps AUX PWR In: 2-pos green Euro block
Gpio
General Purpose Inputs	0-24VDC analog input or contact closure
General Purpose Outputs	Open collector, 24VDC at 200mA max, internal pullup to 3.3V
Gpio 12 Vdc Power Pins	12VDC out at 100mA max
Miscellaneous
Poe+ Power Input	IEEE 802.3at compliant powered device, PoE+ power supplied through LAN A port
External Power Input	24VDC, 1.2A supplied via the external power input, may be used as the primary power source or as a backup to the PoE+ source
Regulatory	FCC 47 CFR Part 15 Class A, IC ICES-003, CE (EN55032, EN55035), EU RoHS directive 2011/65/EU, WEEE directive 2012/19/EU, China RoHS directive GB/T26572, EAC, RTL
Product Dimensions	220 × 240 × 44 mm 8.66 × 9.43 × 1.75 in 1RU half rack
Included Accessories	Connector kit, rack ears, surface mount kit, installation manual, USB cable (Type A to Type B)

Sales > QSC > Q-SYS Audio, Video & Control Ecosystem > Q-SYS I/O Peripherals > I/O-8 Flex Channel Expander

I/O-8 Flex Channel Expander

I/O-8 Flex Channel Expander

Pages