Name: Crown Audio CDi 2|600BL
Brand: Crown Audio
Rating: 4.7 (23 reviews)

Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600BL offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 2|600BL is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The 2|600BL also comes with BLU link, adding the ability to send and receive channels over HARMAN’s digital audio BUS. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

DriveCore Technology – Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.
Network Control and Monitoring – Through Harman’s HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.
DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration
BLU link (BL models only) – Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
Direct Drive 70/100Vrms Output – Each output channel is capable of provide either 70V or 100V for high impedance applications.
Front-Panel Interface – Completely configure the amplifier using an intuitive front-panel interface.
GPIO/AUX Port – Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.

Blu Link
Channels	2
Sensitivity (For Full Rated Power At 8 Ohms)	0.7V RMS
Rated Power Output (Per Channel @ 4 Ohms)	600W
Analog Input Signal To Noise Ratio (Ref. Rated Power, 100V, 20Hz - 20Khz) At 8 Ohms)	> 104dB
Thd (Full Rated Power, 20 Hz - 20 Khz)	0.35%
Damping Factor (20 Hz To 100 Hz)	> 1000
Frequency Response (8Ω, 20 Hz - 20 Khz)	+/-0.5dB
Crosstalk (Below Rated Power) 20 Hz To 1 Khz	> 80dB
Input Impedance (Nominally Balanced, Nominally Unbalanced)	20 kΩ balanced, 10 kΩ unblanced
Dimensions (Inches) (W X H X D) (Depth Not Including 1.3 Inch Front Panel Protrusion)	19 x 3.5 x 12.25
Weight	14.56 lbs (6.6 kg)
Power Supply Connector	"Standard IEC type 320 inlet for detachable connector 100 – 240V~"

Crown Audio CDi 2|600BL

Specifications of the CDi 2|600BL

Description

CDi 2|600BL Features

Data Sheets, Manuals and Resources for the CDi 2|600BL

Pages