Sales > Crown Audio > DriveCore Install Network Series > DCi 2|2400N

DCi 2|2400N

Two-channel, 2400W @ 4Ω Power Amplifier, 70V/100V

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology.

DCi 2|2400N

Two-channel, 2400W @ 4Ω Power Amplifier, 70V/100V

The new DriveCore install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology.

View more products in the DriveCore Install Network Series range

Specifications

Frequency Response ( 8 Ohms, 20 Hz - 20 kHz)	+/- 0.25 dB
BLU Link Input Signal to Noise Ratio (A-Weighted)	> 108dB
Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz)	0.35%
Voltage Gain	34 dB
Damping Factor (20 Hz to 100 Hz)	>5000
Input Impedance (nominal balanced, unbalanced)	10 kOhms, 5 kOhms
Maximum Input Level before Compression	+20 dBu
Load Impedance (Stereo/Dual Mode)	2 - 16 Ohms; 70Vrms and 100Vrms
Load Impedance Bridge Mono	4 - 16 Ohms; 140Vrms and 200Vrms
Cooling	Continuously variable speed forced air, front to back airflow
Required AC Mains (+/- 10%)	100V-240V ~ 50/60 Hz
IEC Power Connector	20A IEC
Dimensions	19" x 3.5" x 19" (48.3cm x 8.9cm x 48.3cm)
Weight	24lbs (10.9kg)

Description

DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.

Features

ANALOG & DIGITAL INPUTS – With digital audio transport via HARMAN’s proprietary BLU link, plus balanced analog inputs, DCi gives you a tremendous audio advantage – at a much lower cost. The priority input router allows you to specify a primary input, and if audio is lost the amp automatically switches to the other input.

NETWORK MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORTS – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer.

DIGITAL SIGNAL PROCESSING

LevelMAX Limiters
Input/Output EQ
Delay
Matrix Mixer
Speaker Line Monitoring

Description

Features

Specification

Pages

The Institute of Sound, Communications & Visual Engineers | ISCVE