Sales > Lightware > Matrices & Switchers > MX2M-4HDMI20-IB

MX2M-4HDMI20-IB

HDMI 2.0 Input Board

The MX2M-4HDMI20-IB is a HDMI 2.0 compatible input board for the MX2M modular matrix family. The hot-swappable input board has four HDMI connectors of type A, all with flange, allowing easy installation and operation on a wide range of applications where flexibility and versatility are key concerns.

MX2M-4HDMI20-IB

HDMI 2.0 Input Board

View more products in the Matrices & Switchers range

Specifications

Resolution	Up to UHD/4k@60Hz 4:4:4 (with support for extreme formats e.g 7kx1k by
Signal Type	HDMI 2.0, HDMI 1.x, DVI
Maximum data rate	18 Gbps
Maximum pixel clock	597 MHz
Content protections	HDCP 1.x, HDCP 2.2, HDCP 2.3
Connector type	4x HDMI receptacle type A with and without flange
Video processing	Signal parameter measurement
Standards	HDMI 2.0, HDMI 1.4, DVI
AUDIO
Audio mode	Simultaneous pass-through and de-embedding to the Audio layer
Supported audio formats for pass-through	All HDMI2.0 audio formats
Supported audio formats for de-embedding	Uncompressed - LPCM (up to 8 channels, 192 kHz, 24 bits per sample)
	Compressed - MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES
	Compressed HBR - Dolby Atmos, Dolby TrueHD, DTS-HD DA
GENERAL
Powering	via MX2M frame
Power consumption (max)	11 W
Thermal dissipation (max)	37,5 BTU/hr
Operating conditions	Ambient temperature 0-50oC
	Relative humidity 0-90% (non-condensing)
Transportation conditions	Ambient temperature -20-70oC
	Relative humidity 0-95% (non-condensing)
Compliance	EN 55032:2015, IEC 61000-3-3:2013+AMD1:2017, IEC 61000-3-2:2018, FCC CFR Title 47, Part 15, Subpart B
Warranty	3 years

Description

All inputs are HDMI 2.0 compliant and can pass HDMI signals with a pixel clock frequency of up to 597 MHz, allowing signal transmission with a maximum resolution of 4K UHD @ 60Hz 4:4:4.

Advanced professional features of the board include audio de-embedding from the audio layer HDCP enable/disable mode, support for signals with high dynamic range or unusual dimensions, EDID management, and Frame detector.

The board extracts the audio from all four incoming HDMI signals to the audio layer, through which the audio streams can be routed to any of the video or audio output ports.

Features

HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
Pass-through and de-embedding of embedded audio including uncompressed (LPCM, DSD), compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES)
Pass-through and de-embedding of embedded audio also including compressed HBR (Dolby Atmos, Dolby TrueHD, DTS-HD DA) formats
Hot-swap support
HDMI 2.0, HDMI 1.x, and DVI compatible
CEC support (command injection)
Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
No signal latency, zero frame delay

Related Resources

Datasheet

MX2M-4HDMI20-IB.pdf

Description

Features

Specification

Related Resources

Pages

The Institute of Sound, Communications & Visual Engineers | ISCVE