Sales > Lightware > Matrices & Switchers > MX2M-4OPTJ-OB

MX2M-4OPTJ-OB

HDMI 2.0 Multimode Fiber Output Board

MX2M-4OPTJ-OB is a HDMI 2.0 compatible output board for the MX2M modular matrix family. The hot-swappable output board has four ports with optical SC connectors that can be connected to HDMI20-OPTJ-TX90 extenders.

MX2M-4OPTJ-OB

HDMI 2.0 Multimode Fiber Output Board

View more products in the Matrices & Switchers range

Specifications

VIDEO
Resolution	Up to 4k/UHD@60Hz 4:4:4
Signal Type	HDMI 2.0, HDMI 1.x, DVI
Maximum data rate	18 Gbps
Maximum pixel clock	597 MHz
Content protections	HDCP 1.x, HDCP 2.2, HDCP 2.3
Connector type	4x optical SC
Video processing	Video parameter measurement, chroma subsampling to 4:2:2
Standards	HDMI 2.0, HDMI 1.4, DVI
AUDIO
Audio mode	Simultaneous pass-through and de-embedding to the Audio layer
Supported audio formats for pass-through	All HDMI2.0 audio formats
Supported audio formats for de-embedding	Uncompressed - LPCM (up to 2 channels, 192 kHz, 24 bits per sample)
	Compressed - MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES
	Compressed HBR - no
GENERAL
Powering	via MX2M frame
Power consumption (max)	15,5 W
Thermal dissipation (max)	52,9 BTU/hr
Operating conditions	Ambient temperature 0-50oC
	Relative humidity 0-90% (non-condensing)
Transportation conditions	Ambient temperature -20-70oC
	Relative humidity 0-95% (non-condensing)
Compliance	EN 55032:2015, IEC 61000-3-3:2013+AMD1:2017, IEC 61000-3-2:2018, FCC CFR Title 47, Part 15, Subpart B, CENELEC EN 60825-1:2014, FCC CFR Title 21, Chapter I, Subchapter J, Part 1040, Section 1040.10
Warranty	3 years

Description

All outputs are HDMI 2.0 compliant and can pass HDMI signals with a pixel clock frequency of up to 597 MHz over distances ranging between 600 meters (4K UHD) to 2500 meters (Full HD).

Advanced professional features of the board include HDCP conversion, support for signals with high dynamic range or unusual dimensions, Pixel Accurate Reclocking, EDID management, and chroma subsampling from 4:4:4 to 4:2:2.

The board can replace the audio in all four routed HDMI signals with compressed or LPCM audio streams from the Audio layer.

Features

HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
Pass-through and de-embedding of embedded audio including uncompressed (LPCM, DSD), compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES)
Pass-through and de-embedding of embedded audio also including compressed HBR (Dolby Atmos, Dolby TrueHD, DTS-HD DA) formats
Hot-swap support
Extension distance of up to 600 meters for 4k@60Hz 4:4:4 signals and 2500 meters for full HD signals
HDMI 2.0, HDMI 1.x, and DVI compatible
Advanced EDID Management
CEC support (command injection)
Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
No signal latency, zero frame delay

Related Resources

Datasheet

MX2M-4OPTJ-OB.pdf

Description

Features

Specification

Related Resources

Pages

The Institute of Sound, Communications & Visual Engineers | ISCVE