QSC DCIO/DCIO-H
Digital Cinema Input/Output for Q-SYS
DCIO is a cinema-specific interface that serves as the audio I/O for each screen in a Q-SYS™ enabled cinema complex.
View more products in the Q-SYS I/O Peripherals range 
Contact us for purchasing info
Specifications of the DCIO/DCIO-H
| General | |
| Dimensions (H X W X D) | 1.75 (2 RU) x 19 x 11.2 inches (44 x 483 x 282.5 mm) |
| Line Voltage Requirements | 100 VAC – 240 VAC, 50/60 Hz |
| Accessories Included | 1m UL/CSA line cord, Euro-style connectors for outputs and relay connections |
| Front Panel Controls And Indicators | |
| Parameter Adjust | Rotary encoder |
| Power On Indicator | Blue LED |
| Display | Monochrome 304x96 blue OLED graphics display |
| Other | Momentary mute button Mute LED (red) Screen Navigation (Next) and ID buttons |
| Rear Panel Connectors | |
| Mic/Line Input | XLR — Mic (+ phantom power) or line level |
| Line Input | 3.5 mm TRS, unbalanced |
| H.i./V.i. Output | 5-pin Euro-style (x1) – common GND |
| Monitor Line/Speaker Outputs | Line: 3-pin Euro-style, Speaker: 2-pin Euro-style, 10 W max output |
| Audio Performance | |
| A/D Conversion | 32-bit delta-sigma, 48 kHz |
| Frequency Response | 20 Hz to 20 kHz (+/- .5dB) |
| Stereo Line Inputs | |
| Connector | 3.5mm TRS mini jack |
| Input Stage Type | Unbalanced input |
| Input Impedance (4Dbu Sens) | > 10k Ohms |
| Max Analog Input Level (4Dbu Sens) | 15 dBu (4.4 Vrms) |
| Input Impedance (-10Dbv Sens) | 2.7k Ohms |
| Max Analog Input Level (-10Dbv Sens) | 1 dBV (1.2 Vrms) |
| Other | |
| Relay Outputs (4) | 3-pin Euro-style Normally open (NO), normally closed (NC), and common Max 30 VDC @ 1A |
| Automation Inputs (Rj45 - 6 Gpi) | Max input voltage 5V (3.3V typical) TTL compatible dry contact closure |
| Aes3/Ebu Inputs | Ch. 1-8, 15-16 (RJ45 x2) |
| Automation Inputs | RJ45, RS-232 |
| Dual Gigabit Ethernet Q-Lan Ports | LAN A, LAN B (RJ45 x2) |
| Hdmi Input/Output (Dcio-H Only) | HDMI 2.0, Type A female connectors |
| Power Switch | Rocker switch |
| Iec Power Connector | |
| Aes/Ebu Digital Inputs (Rj45) | |
| Input Stage Type | Balanced input |
| Input Impedance | 110 ohms |
| Input Sample Rate | 48 kHz or 96 kHz |
| Mic/Line Input (Xlr) | |
| Input Stage Type | Active balanced input |
| Input Impedance | 2.2k Ohms |
| Max Analog Input Level | 26 dBu |
| Phantom Power Voltage | 15V |
