Allen & Heath

Allen & Heath dLive CTi1500

12 faders. Single 12″ touchscreen

dLive CTi1500 takes our best-selling compact dLive C1500 control surface and applies ‘superleggera’ Italian performance car principles to set a new standard for lightweight control surfaces.

CTi1500 has been engineered across the board to ruthlessly strip out as much weight as possible, while ensuring tour-grade structural integrity and a first-class user experience.

dLive CTi1500
1 / 5
View more products in the dLive range

Technical Specifications

INPUTS
Mic/Line XLR Inputs
Balanced XLR, +48V phantom power
Mic/Line Preamp
Fully recallable
Input Sensitivity
-60 to +15dBu
Analogue Gain
+5 to +60dB, 1dB steps
Pad
-20dB Active PAD
Maximum Input Level
+30dBu (PAD in)
Input Impedance
>4kΩ (Pad out), >10kΩ (Pad in)
Mic EIN
-127dB with 150Ω source
Phantom Power indication
Per socket, internal or external phantom power sensing, triggered at 24V
Digital Inputs
AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
OUTPUTS
Analogue XLR Outputs
Balanced
Output Impedance
<75Ω
Nominal Output
+4dBu = 0dB meter reading
Maximum Output Level
+22dBu
Residual Output Noise
-92dBu (muted, 20-20kHz)
Digital Outputs
AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
SYSTEM
Dynamic Range
110dB
System Signal to Noise
-92dB
Frequency Response
20Hz - 30kHz +0/-0.8dB
THD+N (analogue in to out)
0.0015% @ +16dBu output, 1kHz 0dB gain
Headroom
+18dB
Internal operating Level
0dBu
dBFS Alignment
+18dBu = 0dBFS (+22dBu at XLR output)
Meter Calibration
0dB meter = -18dBFS (+4dBu at XLR out)
Meter Peak indication
-3dBFS (+19dBu at XLR out)
Sampling Rate
96kHz +/- 20 PPM
ADC
24-bit Delta-Sigma
DAC
24-bit Delta-Sigma
Latency
0.7 ms (MixRack XLR in to XLR out, Input to Mix)
Operating Temperature Range
0 deg C to 35 deg C (32 deg F to 95 deg F)
Mains Power
100-240V AC, 50-60Hz, 110W max
USB Audio playback
Mono/stereo .WAV files, 16/24bit, 44.1/48/96kHz
USB Audio recording
Stereo .WAV files, 24bit 96kHz
Dimensions and Weights
Unboxed (Width x Depth x Height x Weight)
440 x 644 x 337 mm x 11.5kg (17.4"x 25.4"x 13.27") (25.4lbs)
Boxed (Width x Depth x Height x Weight)
655 x 820 x 470 mm x 20kg (25.8"x 32.3"x 18.5") (44lbs)

Compact Touring. Re-engineered.

Since its launch, C1500 has become a firm favourite in compact touring, particularly for fly dates, bus tours, support slots – in fact any applications where size and weight need to be carefully balanced against audio requirements.

CTi1500 takes this no-compromise compact concept even further. With a mission to create a surface that would be under 23Kg/50lbs including flightcase, our engineering team embarked on a year-long project to create the ultimate super-lightweight control surface.

On the outside, the side trims have been replaced by Titanium panels, lightweight, super-strong and a first in touring mixer design. The rear and base panels have also been cleverly re-engineered to cut the weight but retain strength.

Internally the weight loss continues, with new alloy metalwork throughout.

Crucially, the front panel remains largely the same as a C1500, providing the familiar dLive feel, but redesigned to replace the armrest with sleek steel curves.

Every change was carefully considered and rigorously tested to meet the high standards required of any Allen & Heath touring product.

Every ounce a dLive.

It may be the lightest full control surface in the dLive range, but CTi1500 doesn’t pull its punches and retains every knob, button and function of its C1500 stablemate.

That means packed in its tiny footprint you get 12 faders (with 6 layers), built-in audio I/O, an audio networking port, a 12″ capacitive touchscreen and the innovative Harmony UI for the fastest workflow in the industry. You’re also not short of tactile controls, with plenty of rotary controls and 19 assignable softkeys.

Ready for takeoff.

Loaded with an I/O card of your choice, and snugly wrapped in its dust cover (yes – we weighed that too…), CTi1500 can fly under 23kg / 50lbs in a custom flight case.

*Note – you’ll need a flightcase that weighs under 10kg/22lbs – if you’re struggling to find a supplier please contact us at support.allen-heath.com and we can help point you in the right direction.

Ultra-Portable Design

  • Weighs just 11.5 kg (25.4 lbs)
  • Fly-ready: sub-23 kg with flightcase*, I/O card & dust cover
  • Built with titanium side panels and lightweight alloy metalwork
     *Requires flightcase under 10 kg (22 lbs)

Flexible Control Surface

  • 12 motorised faders with a fully assignable layout (up to 72 fader strips)
  • 12” capacitive touchscreen with Harmony UI for seamless control
  • Gesture control – pinch, swipe, drag & drop
  • Wrap-around controls for intuitive mixing
  • Dedicated EQ view with real-time visual feedback
  • Configurable widget areas for Scenes, FX, meters & more
  • 19 assignable SoftKeys
  • Engineer’s Wedge and IEM strips for quick monitoring

Comprehensive Metering & Recording

  • Full multi-point metering with daylight visibility
  • USB stereo recording & playback

Professional I/O

  • 6 XLR mic/line inputs, 6 XLR line outputs
  • AES3 digital in/out (1 stereo pair each)
  • GigaACE gigabit link to MixRack
  • DX Link for remote I/O expansion
  • 128×128 channel I/O Port at 96 kHz
  • 2 network ports, BNC Wordclock I/O, and video output
INPUTS
Mic/Line XLR InputsBalanced XLR, +48V phantom power
Mic/Line PreampFully recallable
Input Sensitivity-60 to +15dBu
Analogue Gain+5 to +60dB, 1dB steps
Pad-20dB Active PAD
Maximum Input Level+30dBu (PAD in)
Input Impedance>4kΩ (Pad out), >10kΩ (Pad in)
Mic EIN-127dB with 150Ω source
Phantom Power indicationPer socket, internal or external phantom power sensing, triggered at 24V
Digital InputsAES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
OUTPUTS
Analogue XLR Outputs Balanced
Output Impedance<75Ω
Nominal Output+4dBu = 0dB meter reading
Maximum Output Level+22dBu
Residual Output Noise-92dBu (muted, 20-20kHz)
Digital OutputsAES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω
SYSTEM
Dynamic Range110dB
System Signal to Noise-92dB
Frequency Response20Hz - 30kHz +0/-0.8dB
THD+N (analogue in to out)0.0015% @ +16dBu output, 1kHz 0dB gain
Headroom+18dB
Internal operating Level 0dBu
dBFS Alignment+18dBu = 0dBFS (+22dBu at XLR output)
Meter Calibration0dB meter = -18dBFS (+4dBu at XLR out)
Meter Peak indication-3dBFS (+19dBu at XLR out)
Sampling Rate96kHz +/- 20 PPM
ADC24-bit Delta-Sigma
DAC24-bit Delta-Sigma
Latency0.7 ms (MixRack XLR in to XLR out, Input to Mix)
Operating Temperature Range0 deg C to 35 deg C (32 deg F to 95 deg F)
Mains Power100-240V AC, 50-60Hz, 110W max
USB Audio playbackMono/stereo .WAV files, 16/24bit, 44.1/48/96kHz
USB Audio recordingStereo .WAV files, 24bit 96kHz
Dimensions and Weights
Unboxed (Width x Depth x Height x Weight)440 x 644 x 337 mm x 11.5kg (17.4"x 25.4"x 13.27") (25.4lbs)
Boxed (Width x Depth x Height x Weight)655 x 820 x 470 mm x 20kg (25.8"x 32.3"x 18.5") (44lbs)

About Penguin Media Solutions

Penguin Media Solutions is a professional audio, video, and lighting design, installation, and maintenance company based in Brighton, UK. As an authorised Martin Audio dealer, we provide high-performance AV systems for commercial venues, hospitality, and event spaces across Brighton, London, and South-East England.

The Institute of Sound, Communications & Visual Engineers | ISCVE
Restaurant & Bar Design Awards Winner

© 2026 Penguin Media Solutions. All rights reserved.

Powered by Ganda Media

Privacy Policy