Allen & Heath dLive DM32 MixRack

XCVI Core

The power of dLive emanates from the XCVI Core – pioneered by the Allen & Heath R&D team using next generation FPGA technology, with 36 parallel virtual processing cores generating enough power for 160×64 channels of processing at 96kHz sampling rate. Six parallel mixing engines within the Core calculate over 10,000 cross points per sample, while the FPGA router has capacity for 3,000 x 3,000 audio paths. The massive power of XCVI (25 billion operations per second) allows dLive to deliver 128 full processing inputs and 16 stereo FX returns, a configurable 64 bus architecture, variable bit depth for ultimate precision and noise performance, a virtually infinite mix headroom thanks to a 96bit accumulator, and class leading latency at an ultra-low 0.7ms.

DEEP Processing

Our DEEP processing architecture embeds class-leading compressors and processing emulations directly within dLive’s input and mix channels. An array of bespoke algorithms including Graphic EQs, Compressors and a 64 channel Automatic Mic Mixer (AMM) can be inserted on the fly without burning FX slots and without the setup, latency and licence hassles associated with external plug-ins – they’re right there, where you need them, whenever you need them. The compressor models capture the audio nuances and non-linear ballistics of industry classics, ranging from a Slow-Opto model, various RMS detection and soft knee circuits, through to super-fast peak and RMS based compression/limiting devices.

RackExtra FX

The RackExtra FX portfolio combines the pristine quality and wide choice offered by boutique plug-ins with the convenience and low latency of onboard processing. It’s no secret that we have a passion bordering on obsession for crafting painstakingly faithful emulations of the most revered analogue outboard equipment. Drawing on the power of the XCVI Core, we have built hugely potent DSP kernels within the FPGA, allowing us to integrate our proven library of reverb, delay and modulator algorithms into dLive, with 16 FX slots available, each with a dedicated stereo return.

Automatic Mic Mixer (AMM)

AMM provides automatic level control of up to 64 microphones for spoken word applications such as conferences, panel shows, discussion forums and government / council meetings.

As well as reducing the risk of feedback, legibility is enhanced by minimising phase interference between channels, a common problem in multi-microphone spoken word applications.

Up to 4 zones can be enabled allowing automatic control of multiple rooms simultaneously from one interface.

Two modes of operation, NOM & D-Classic, are included:

• D-Classic utilises dynamic gain sharing and is quick and easy to set-up.
• NOM (Number of Open Microphones) builds on the logic based automatic mixing algorithm of our iDR install range offering additional parameters and maximum flexibility to the operator.

Built To Endure

Maybe it’s no coincidence that our lead mechanical designer on the dLive project used to be a tank commander. All dLive consoles have been designed to deliver the optimal balance between strength and weight, employing higher grade metal on the sides and folded steel at key points for added rigidity. Not only does every console, MixRack and expander have dual power supply slots for redundancy, but we’ve also employed the same rugged, hot-swappable PSU design across the range for maximum peace of mind and minimum inventory. Dual redundancy is also built into every audio connection throughout the system. We have also paid particular attention to console illumination, conducting rigorous trials to ensure that dLive excels in the sunny, outdoor settings where many digital consoles become almost unusable.

High-Performance Audio Engine

• 32 mic/line inputs and 16 line outputs
• Powered by the XCVI 160×64 FPGA core at 96kHz sample rate
• Variable bit-depth processing for exceptional precision and low noise
• 96-bit accumulator architecture ensures virtually unlimited mix headroom
• Ultra-low latency <0.7ms — class-leading for live applications
• New transparent preamp design with Active PAD circuit for consistent performance across sources

Massive Mixing Power

• 128 input channels and 64 fully processed mix outputs
• Configurable 64-bus architecture – supports groups, FX, auxes, matrices, and mains
• Flexible mains formats: LR, LCR, and up to 5.1 surround
• Multiple PFL paths for advanced monitoring
• 16 RackExtra FX engines with dedicated stereo returns
• 24 DCA groups
• Built-in Automatic Mic Mixer (AMM) – up to 64 channels across 1, 2, or 4 zones
• Integrated signal generator and real-time RTA

Scalable Connectivity & I/O Expansion

• Dual-redundant GigaACE gigabit links to surface
• 2 redundant DX ports for I/O expansion
• 3 I/O ports, each supporting 128 channels at 96kHz
• Dedicated ME-1 port for personal monitoring (48kHz)
• Add up to 46 DX I/O expanders via DX Hubs or DX Link cards
• 2 network ports, Wordclock I/O, and comprehensive connection hub

Built for Touring & Reliability

• Dual-redundant, hot-swappable power supplies
• Flush front panel with ultra-quiet fan — ideal for studios or low-noise environments
• Reversible rack ears for flexible installation
• Covered by 3-year warranty for peace of mind