Allen & Heath DT168
16 XLR Input / 8 XLR Output - 96kHz Dante
The DT168 provides 16 microphone preamps and 8 line outputs in a convenient stagebox form factor. Ideal for portable applications thanks to its rubber bumpers and handle, it can be deployed on stage or used as a drop-in expander in any SQ, Avantis, AHM-64 or dLive Dante network.
View more products in the Everything I/O range 
Contact us for purchasing info
Specifications of the DT168
| INPUTS | |
| Mic/Line XLR Inputs | Balanced, +48V Phantom Power |
| Mic/Line Preamp | Fully recallable |
| Input Sensitivity | -60 to +15dBu |
| Analogue Gain | +5 to +60dB, 1dB steps |
| Pad | -20dB Active PAD |
| Maximum Input Level | +30dBu (PAD in) |
| Input Impedance | >4kΩ (Pad out), >10kΩ (Pad in) |
| Mic/Line Channel noise | 22-22kHz, Direct Out @ unbalanced out |
| Mic EIN | -127dB with 150Ω source |
| Unity gain (Pad in) | -90dBu |
| Low gain (5dB, Pad out) | -96dBu |
| Mid gain (30dB, Pad out) | 0.003% -88dBu @ 1kHz, 0dBu output |
| Mic/Line Channel THD+N | 22-22kHz, Direct Out @ unbalanced out |
| Unity gain (Pad in) | 0.003% -88dBu @ 1kHz, 0dBu output |
| Low gain (5dB, Pad out) | 0.002% -93dBu @ 1kHz, 0dBu output |
| OUTPUTS | |
| Analogue XLR Outputs | Balanced, Relay protected |
| Output Impedance | <75Ω |
| Nominal Output | +4dBu = 0dB meter reading |
| Maximum Output Level | +22dBu |
| Residual Output Noise | -92dBu (muted, 20-20kHz) |
| DANTE | |
| Sample rate | 48kHz or 96kHz |
| Bit Depth | 24 Bit |
| Gain, Pad, 48v Control | Allen & Heath dLive, Avantis, AHM-64 or SQ system |
| TEMPERATURE | |
| Operating Temperature | 0 deg C to 40 deg C (32 deg F to 104 deg F) |
| POWER | |
| Mains Power | 100-240V, 50/60 Hz, 40W max |
| DIMENSIONS & WEIGHTS | Width x Depth x Height x Weight |
| DT168 | 410mm x 190mm x 185mm x 4.6kg (16.1” x 7.5” x 7.3” x 10.1lbs) |
