Lightware MX-TPS-OB

MX-TPS2-OB-P the 8 channel twisted pair output board provides HDMI 1.4, audio, Ethernet and RS-232 transmission on a single CAT5/6/7 cable up to 100m in HDBaseTTM and 170m distance in Long reach mode (maximal resolution is Full HD 1080p in Long reach mode).

Resolutions up to 4K and 48-bit colour depth are handled with all standard audio formats as well as 120Hz 3D signals. The board offers bi-directional RS-232 and Ethernet transmission (each board has a 10/100 uplink connector for the Ethernet network connection) and remote powering option for the TPS extenders available with the PoE add-on. The output board is available with audio add-ons: digital S/PDIF or analog stereo connectors are available for advanced audio functions (HDMI embedded audio signals are managed by the board).

The MX-TPS2-OB-P without the digital or analog audio option also handles HDMI embedded audio. The board is compatible with deep color, Dolby TrueHD and DTS-HD audio and features PCM audio sample rate conversion. Advanced professional functions such as HDCP enable/disable mode, Pixel Accurate Reclocking, Advanced EDID Management and Frame Detector are integrated providing the highest level of setup and usage.

Digital S/PDIF Audio Option:

• S/PDIF breakout for every port
• Bi-directional configurable S/PDIF connectors: audio can be de-embedded from the HDMI signals or audio can be embedded (or replaced) to the HDMI signal
• PoE compatible
• Remote powering on/off switching
• Status feedback

Analog Stereo Audio Option:

• Bi-directional configurable analog stereo port with 5-pole Phoenix connector
• Stereo PCM audio up to 96 kHz can be de-embedded from the HDMI signals
• Digitized audio (PCM 48 kHz) can be embedded (or replaced) to the HDMI signal
• Volume, gain control
• PoE compatible
• Remote powering on/off switching
• Status feedback

• 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
• Optional digital or analog audio embedding and de-embedding add-ons
• Adjustable analog audio settings (volume, gain, balance)
• Optional digital or analog audio embedding and de-embedding add-ons
• Extends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 over one CAT5/6/7 cable
• Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
• Frame Detector (analyze detailed video timings)
• Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
• TPS link quality and cable length monitoring
• HDBaseT compatible
• Ethernet extension (100 Mbps)
• HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
• Advanced EDID Management
• Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
• Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
• Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
• Pixel Accurate Reclocking
• No video compression
• Bi-directional RS-232 extension (pass-through)
• HDCP 1.4 compliant
• Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
• Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
• Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
• Built-in video test pattern generator
• No signal latency, zero frame delay