Lightware MX2M-4HDMI20-OB
HDMI 2.0 Output Board
The MX2M-4HDMI20-OB is a HDMI 2.0 compatible output board for the MX2M modular matrix family. The hot-swappable output board has four HDMI connectors of type A, all with flange, allowing easy installation and operation on a wide range of applications where flexibility and versatility are key concerns.
Description
All outputs are HDMI 2.0 compliant and can pass HDMI signals with a pixel clock frequency of up to 597 MHz, allowing signal transmission with a maximum resolution of 4K UHD @ 60Hz 4:4:4.
The board can replace the audio in all four routed HDMI signals with compressed or LPCM audio streams from the audio layer.
MX2M-4HDMI20-OB Features
- HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
- Pass-through and de-embedding of embedded audio including uncompressed (LPCM, DSD), compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES)
- Pass-through and de-embedding of embedded audio also including compressed HBR (Dolby Atmos, Dolby TrueHD, DTS-HD DA) formats
- Hot-swap support
- HDMI 2.0, HDMI 1.x, and DVI compatible
- CEC support (command injection)
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- No signal latency, zero frame delay
Resources & Downloads
Data sheets, manuals and resources for the MX2M-4HDMI20-OB
Interested in this product?
Our AV experts are ready to help you find the perfect solution for your project.
Contact Our TeamQuick Specs
- Relative humidity 0-95% (non-condensing)
- AUDIO
- VIDEO
- GENERAL
- Powering
- via MX2M frame
Technical Specifications
All outputs are HDMI 2.0 compliant and can pass HDMI signals with a pixel clock frequency of up to 597 MHz, allowing signal transmission with a maximum resolution of 4K UHD @ 60Hz 4:4:4.
The board can replace the audio in all four routed HDMI signals with compressed or LPCM audio streams from the audio layer.
- HDCP 2.3 and HDCP 1.4 support with cross conversion capabilities
- Pass-through and de-embedding of embedded audio including uncompressed (LPCM, DSD), compressed (MPEG 1 L1, MPEG 1 L2, MPEG 1 L3, AC-3, Dolby Digital, Dolby Digital Plus, Dolby Digital EX, Dolby Digital Surround EX, DTS, DTS ES)
- Pass-through and de-embedding of embedded audio also including compressed HBR (Dolby Atmos, Dolby TrueHD, DTS-HD DA) formats
- Hot-swap support
- HDMI 2.0, HDMI 1.x, and DVI compatible
- CEC support (command injection)
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- No signal latency, zero frame delay
| Relative humidity 0-95% (non-condensing) | |
| AUDIO | |
| VIDEO | |
| GENERAL | |
| Powering | via MX2M frame |
| Warranty | 3 years |
| Standards | HDMI 2.0, HDMI 1.4, DVI |
| Audio mode | Simultaneous pass-through and de-embedding to the Audio layer |
| Compliance | EN 55032:2015, IEC 61000-3-3:2013+AMD1:2017, IEC 61000-3-2:2018, FCC CFR Title 47, Part 15, Subpart B |
| Resolution | Up to UHD/4k@60Hz 4:4:4 (with support for extreme formats) |
| Signal Type | HDMI 2.0, HDMI 1.x, DVI |
| Connector type | 4x HDMI receptacle type A with and without flange |
| Video processing | Signal parameter measurement |
| Maximum data rate | 18 Gbps |
| Content protections | HDCP 1.x, HDCP 2.2, HDCP 2.3 |
| Maximum pixel clock | 597 MHz |
| Operating conditions | Ambient temperature 0-50oC |
| Power consumption (max) | 11 W |
| Thermal dissipation (max) | 37,5 BTU/hr |
| Transportation conditions | Ambient temperature -20-70oC |
| Supported audio formats for de-embedding | Uncompressed - LPCM (up to 8 channels, 192 kHz, 24 bits per sample) |
| Supported audio formats for pass-through | All HDMI2.0 audio formats |
About Penguin Media Solutions
Penguin Media Solutions is a professional audio, video, and lighting design, installation, and maintenance company based in Brighton, UK. As an authorised Martin Audio dealer, we provide high-performance AV systems for commercial venues, hospitality, and event spaces across Brighton, London, and South-East England.
