
Lightware’s universal switcher allowing users to switch between hosts and BYOD devices using a combination of HDMI 2.0 and USB 3.1 Gen1 connections, with video and audio signals up to 4k@60Hz 4:4:4 and data speeds up to 5 Gbps.

| Relative humidity 0-95% (non-condensing) | |
| GPIO | Connector - 8Pol Phoenix |
| AUDIO | |
| RS232 | Connector - 1x 3Pol Phoenix |
| VIDEO | |
| CONTROL | |
| GENERAL | |
| Ethernet | Control - 1x 100Base-T via EtherCON for Secure Control |
| Powering | External 120W power supply |
| Warranty | 3 years |
| Standards | HDMI 2.0, HDMI 1.4, DVI |
| Audio mode | Simultaneous pass-through and de-embedding to the Audio layer |
| Compliance | EN 55032:2015, IEC 61000-3-3:2013+AMD1:2017, FCC CFR Title 47, Part 15, Subpart B |
| Resolution | Up to UHD/4k@60Hz 4:4:4 |
| Signal Type | DP, HDMI 2.0, HDMI 1.x, DVI |
| Connector type | 2x HDMI receptacle type A with screw locking option |
| USB - Connectors | 1x mini USB Type B for LDC control |
| Video processing | Signal parameter measurement |
| Maximum data rate | 18 Gbps |
| Content protections | HDCP 1.x, HDCP 2.2 |
| Maximum pixel clock | 597 MHz |
| Operating conditions | Ambient temperature 0-50oC |
| Room Occupancy Sensor | Connector - 3Pol Phoenix |
| Transportation conditions | Ambient temperature -20-70oC |
| Supported audio formats for de-embedding | Uncompressed - LPCM (up to 8 channels, 192 kHz, 24 bits per sample) |
| Supported audio formats for pass-through | All HDMI2.0 audio formats |