Crown Audio DCi 4|600DA
Four-channel, 600W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality.
Description
The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
DCi 4|600DA Features
- Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
Resources & Downloads
Data sheets, manuals and resources for the DCi 4|600DA
Interested in this product?
Our AV experts are ready to help you find the perfect solution for your project.
Quick Specs
- Channels
- 4
- Frequency Response ((8Ω, 20Hz-20kHz)
- ±0.25dB
- Dante Input Signal to Noise Ratio (ref. rated power, 8Ω, 20Hz-20kHz)
- >108dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
- 0.35%
- Voltage Gain (at Maximum Level Setting)
- 34dB
Technical Specifications
- Channels
- 4
- Frequency Response ((8Ω, 20Hz-20kHz)
- ±0.25dB
- Dante Input Signal to Noise Ratio (ref. rated power, 8Ω, 20Hz-20kHz)
- >108dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
- 0.35%
- Voltage Gain (at Maximum Level Setting)
- 34dB
- Damping Factor (20Hz to 100Hz)
- >1000
- Input Impedance (nominal balanced, unbalanced)
- 10kΩ, 5kΩ
- Maximum Input Level before Compression Low Gain Mode
- +20dBu
- Load Impedance Stereo/Dual Mode
- 2Ω-16Ω; 70Vrms and 100Vrms
- Load Impedance Bridge Mono
- 4Ω-16Ω; 140Vrms and 200Vrm
- Cooling
- Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (re dBA SPL @ 1M)
- 45
- Required AC Mains (±10%)
- 100Vrms - 240Vrms ~50/60Hz
- Power Connector
- 15A
- Dimensions (WxHxD)
- 19" x 3.5" x 14.25" (48.3 x 8.9 x 35.63 cm)
- Weight
- 20.1 lbs (9.12 kg)
The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
- Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
| Channels | 4 |
| Frequency Response ((8Ω, 20Hz-20kHz) | ±0.25dB |
| Dante Input Signal to Noise Ratio (ref. rated power, 8Ω, 20Hz-20kHz) | >108dB |
| Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) | 0.35% |
| Voltage Gain (at Maximum Level Setting) | 34dB |
| Damping Factor (20Hz to 100Hz) | >1000 |
| Input Impedance (nominal balanced, unbalanced) | 10kΩ, 5kΩ |
| Maximum Input Level before Compression Low Gain Mode | +20dBu |
| Load Impedance Stereo/Dual Mode | 2Ω-16Ω; 70Vrms and 100Vrms |
| Load Impedance Bridge Mono | 4Ω-16Ω; 140Vrms and 200Vrm |
| Cooling | Continuously variable speed forced air, front to back airflow |
| Maximum Fan Noise (re dBA SPL @ 1M) | 45 |
| Required AC Mains (±10%) | 100Vrms - 240Vrms ~50/60Hz |
| Power Connector | 15A |
| Dimensions (WxHxD) | 19" x 3.5" x 14.25" (48.3 x 8.9 x 35.63 cm) |
| Weight | 20.1 lbs (9.12 kg) |
About Penguin Media Solutions
Penguin Media Solutions is a professional audio, video, and lighting design, installation, and maintenance company based in Brighton, UK. As an authorised Martin Audio dealer, we provide high-performance AV systems for commercial venues, hospitality, and event spaces across Brighton, London, and South-East England.
Pages
