Crown Audio DCi 8|600DA
Eight-channel, 600W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V / EN 54-16 Compliant for Life Safety Applications
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality.
1 / 2
Description
The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.
DCi 8|600DA Features
- Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
- EN 54-16 Compliant for Life Safety Applications - Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.
Resources & Downloads
Data sheets, manuals and resources for the DCi 8|600DA
1 / 2
Interested in this product?
Our AV experts are ready to help you find the perfect solution for your project.
Quick Specs
- Channels
- 8
- Frequency Response ((8Ω, 20Hz-20kHz)
- ±0.25dB
- Dante Input Signal to Noise Ratio (ref. rated power, 8Ω, 20Hz-20kHz)
- >108dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
- 0.35%
- Voltage Gain (at Maximum Level Setting)
- 34dB
Technical Specifications
- Channels
- 8
- Frequency Response ((8Ω, 20Hz-20kHz)
- ±0.25dB
- Dante Input Signal to Noise Ratio (ref. rated power, 8Ω, 20Hz-20kHz)
- >108dB
- Total Harmonic Distortion (at full rated power, 20Hz - 20kHz)
- 0.35%
- Voltage Gain (at Maximum Level Setting)
- 34dB
- Damping Factor (20Hz to 100Hz)
- >1000
- Input Impedance (nominal balanced, unbalanced)
- 10kΩ, 5kΩ
- Maximum Input Level before Compression Low Gain Mode
- +20dBu
- Load Impedance Stereo/Dual Mode
- 2Ω-16Ω; 70Vrms and 100Vrms
- Load Impedance Bridge Mono
- 4Ω-16Ω; 140Vrms and 200Vrm
- Cooling
- Continuously variable speed forced air, front to back airflow
- Maximum Fan Noise (re dBA SPL @ 1M)
- 47
- Required AC Mains (±10%)
- 100Vrms - 240Vrms ~50/60Hz
- Power Connector
- 20A
- Dimensions (WxHxD)
- 19" x 3.5" x 17" (48.3 x 8.9 x 42.5 cm)
- Weight
- 30lbs (13.60 kg)
The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.
- Integrated Dante™ / AES67 Networked Audio – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.
- Network Configuration, Monitoring & Control – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
- Programmable General Purpose Input/Output Port – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.
- Digital Signal Processing – DSP capabilities include the following:
- LevelMAX Limiters
- Input/Output EQ
- Crossover
- Delay
- Matrix Router
- Speaker Line Monitoring
- EN 54-16 Compliant for Life Safety Applications - Part 16 of the European Union’s (EU) EN 54 standard for fire detection and alarm systems has a specific requirement for voice alarms, which output messages in the form of a voice message rather than a traditional siren. This amplifier is certified as part of an EN 54-16VACIE*, meeting the stringent requirements of a life safety system to serve the needs of hospitality, large venue and other markets.
| Channels | 8 |
| Frequency Response ((8Ω, 20Hz-20kHz) | ±0.25dB |
| Dante Input Signal to Noise Ratio (ref. rated power, 8Ω, 20Hz-20kHz) | >108dB |
| Total Harmonic Distortion (at full rated power, 20Hz - 20kHz) | 0.35% |
| Voltage Gain (at Maximum Level Setting) | 34dB |
| Damping Factor (20Hz to 100Hz) | >1000 |
| Input Impedance (nominal balanced, unbalanced) | 10kΩ, 5kΩ |
| Maximum Input Level before Compression Low Gain Mode | +20dBu |
| Load Impedance Stereo/Dual Mode | 2Ω-16Ω; 70Vrms and 100Vrms |
| Load Impedance Bridge Mono | 4Ω-16Ω; 140Vrms and 200Vrm |
| Cooling | Continuously variable speed forced air, front to back airflow |
| Maximum Fan Noise (re dBA SPL @ 1M) | 47 |
| Required AC Mains (±10%) | 100Vrms - 240Vrms ~50/60Hz |
| Power Connector | 20A |
| Dimensions (WxHxD) | 19" x 3.5" x 17" (48.3 x 8.9 x 42.5 cm) |
| Weight | 30lbs (13.60 kg) |
About Penguin Media Solutions
Penguin Media Solutions is a professional audio, video, and lighting design, installation, and maintenance company based in Brighton, UK. As an authorised Martin Audio dealer, we provide high-performance AV systems for commercial venues, hospitality, and event spaces across Brighton, London, and South-East England.
Pages
