Lightware UBEX-PRO20-HDMI-F100
Optical AV Over IP Video System for 10G Networks
UBEX is an optical scaling extender which allows 4K UHD@60Hz 4:4:4 uncompressed signal extension with latency-free multistreaming. The device is designed to use Video Over IP transmission on a 10G Ethernet network.
Description
UBEX units can connect to create a complex network with the use of a standard Ethernet switch.
An UBEX-MMU-X200 Matrix Management Unit (MMU) is required to control and supervise a virtual matrix, which can be created by connecting UBEX units as input and output endpoints to an Ethernet switch acting as crosspoint.The MMU device can update the firmware of endpoint UBEX units in a virtual matrix application simultaneously, without limitation for the number of devices in the setup.
One of the prime advantages of such new architecture is scalability: the virtual matrix created can have a virtually infinite number of endpoints, limited only by the number of open ports on the Ethernet switch used. Such a virtual matrix can be also extremely asymmetrical, as e.g. it could have only a few (or one) devices on the input side, while an almost unlimited number of output end units.
Using visually lossless compression, UBEX can extend two Full 4K UHD signals over a single, 10 Gbps Ethernet port. This generates substantial cost saving on the required Ethernet switch side, as with UBEX only half the router size is required compared to the needs of similar, 10 Gbps IP based architectures. For video signals which can be transferred within the 10G speed limit of a single optical fiber, a video signal redundancy feature is available employing the second optical fiber channel.
The UBEX design also favors dual-screen applications: each transmitter and each receiver handles 2x HDMI 2.0 video ports.
UBEX can also be used in a point to point setup as a conventional extender pair between endpoints. It is not required to use an Ethernet switch when point to point extension is required.
The Video Wall Wizard for UBEX features quick video wall installation with bezel adjustment and cropping, includes options for various layouts within the video wall matrix and also allows zones for smart management.
The maximum reachable distance is ranging between 400 m and 80km, depending on the type of singlemode or multimode optical modules installed in the device, and on the signal properties.
The internal power source of UBEX has Medical (60601) and ITE (60950) grade classifications for maximum reliability.
UBEX-PRO20-HDMI-F100 Features
- Scaling of video signals to match the properties of the target display/sink
- Metal enclosure
- Supports all VESA and HDTV resolutions
- HDR support
- Advanced EDID Management
- Fully non-blocking switching architecture
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities
- HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant
- 4096x2160@60Hz/4:4:4 maximum resolution (600MHz)
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
- Color subsampling option on outputs (4:4:4 to 4:2:0 downconversion)
- Pixel Accurate Reclocking
- Automatic or adjustable video format conversion (DVI, HDMI or HDMI deep color)
- Front to back cooling airflow
- Automatic or adjustable color space and color range conversion
- Status LED for extension link detection
- Built-in universal power supply
- Mounting options for rack, furniture or truss
Applications for the UBEX-PRO20-HDMI-F100
Interested in this product?
Our AV experts are ready to help you find the perfect solution for your project.
Contact Our TeamQuick Specs
- Link
- 20G
- Optical
- yes
- Type of videos
- HDMI 2.0
- Nr. of video inputs
- 2
- Nr. of video outputs
- 2
Technical Specifications
UBEX units can connect to create a complex network with the use of a standard Ethernet switch.
An UBEX-MMU-X200 Matrix Management Unit (MMU) is required to control and supervise a virtual matrix, which can be created by connecting UBEX units as input and output endpoints to an Ethernet switch acting as crosspoint.The MMU device can update the firmware of endpoint UBEX units in a virtual matrix application simultaneously, without limitation for the number of devices in the setup.
One of the prime advantages of such new architecture is scalability: the virtual matrix created can have a virtually infinite number of endpoints, limited only by the number of open ports on the Ethernet switch used. Such a virtual matrix can be also extremely asymmetrical, as e.g. it could have only a few (or one) devices on the input side, while an almost unlimited number of output end units.
Using visually lossless compression, UBEX can extend two Full 4K UHD signals over a single, 10 Gbps Ethernet port. This generates substantial cost saving on the required Ethernet switch side, as with UBEX only half the router size is required compared to the needs of similar, 10 Gbps IP based architectures. For video signals which can be transferred within the 10G speed limit of a single optical fiber, a video signal redundancy feature is available employing the second optical fiber channel.
The UBEX design also favors dual-screen applications: each transmitter and each receiver handles 2x HDMI 2.0 video ports.
UBEX can also be used in a point to point setup as a conventional extender pair between endpoints. It is not required to use an Ethernet switch when point to point extension is required.
The Video Wall Wizard for UBEX features quick video wall installation with bezel adjustment and cropping, includes options for various layouts within the video wall matrix and also allows zones for smart management.
The maximum reachable distance is ranging between 400 m and 80km, depending on the type of singlemode or multimode optical modules installed in the device, and on the signal properties.
The internal power source of UBEX has Medical (60601) and ITE (60950) grade classifications for maximum reliability.
- Scaling of video signals to match the properties of the target display/sink
- Metal enclosure
- Supports all VESA and HDTV resolutions
- HDR support
- Advanced EDID Management
- Fully non-blocking switching architecture
- Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps)
- HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities
- HDMI 2.0, HDMI 1.4 and DVI 1.0 compliant
- 4096x2160@60Hz/4:4:4 maximum resolution (600MHz)
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Uncompressed video up to 18 Gbps datarate (600 MHz pixel clock)
- Color subsampling option on outputs (4:4:4 to 4:2:0 downconversion)
- Pixel Accurate Reclocking
- Automatic or adjustable video format conversion (DVI, HDMI or HDMI deep color)
- Front to back cooling airflow
- Automatic or adjustable color space and color range conversion
- Status LED for extension link detection
- Built-in universal power supply
- Mounting options for rack, furniture or truss
| Link | 20G |
| Optical | yes |
| Type of videos | HDMI 2.0 |
| Nr. of video inputs | 2 |
| Nr. of video outputs | 2 |
| USB HID (KVM) | no |
| Full USB 2.0 | no |
| Balanced stereo analog audio I/O ports | no |
| IR I/O and RS.232 control ports | no |
| 1 Gbps Ethernet | yes |
| Nr. of fibers (W/STANDARD SFP +) | 4 |
| Nr. of fibers (W/BIDI SFP +) | 2 |
| 4K scaling | yes2 |
| Framerate conversion | yes |
| 4K UHD @ 60Hz 4:4:4 | yes |
| 30 bit deep color support | yes |
| Audio embedding and de-embedding | no |
| Advanced edid management | yes |
| HDCP 2.2 compliant | yes |
| Seamless switching | yes |
| Multiviewer operation mode | yes |
About Penguin Media Solutions
Penguin Media Solutions is a professional audio, video, and lighting design, installation, and maintenance company based in Brighton, UK. As an authorised Martin Audio dealer, we provide high-performance AV systems for commercial venues, hospitality, and event spaces across Brighton, London, and South-East England.
