Lightware HDMI-4K Manager
HDMI Manager
HDMI-4K-Manager is a multifunctional interface with built‑in EDID Management and Pixel Accurate Reclocking, supporting DVI and HDMI 1.4 signals with or without HDCP encryption.
Description
The output signal is reclocked and stabilized using Lightware Pixel Accurate Reclocking technology to remove jitter caused by long cables or poor quality sources.
HDMI-4K Manager features Advanced EDID Management and can emulate any HDMI display for continuous video output, even if the attached display is disconnected or powered down. HDCP enable/disable function turns off the unit’s HDCP capability, which helps integrate certain laptops into a non‑HDCP AV environment. The EDID memories from 1 to 55 are factory preset, the memories from 62 to 98 are user programmable. EDID memories from 56 to 61 are for universal EDID presets. Memory 00 is transparent for output so using this setting the EDID of the last attached display device (monitor or projector) will be reported to the source. With the Easy EDID Creator (PC software wizard) the users can create their own EDID by completing four simple steps. Experienced users can use the Advanced EDID Editor software to manage every possible setting in the EDID, which can be uploaded to the user programable memory of the HDMI-4K Manager.
HDMI-4K Manager can be rack‑mounted or used standalone. The unit is equipped with the highest grade gold plated connectors to ensure reliable connection.
HDMI-4K Manager Features
- Multiple powering options over DC plug, USB or HDMI 5V input
- Adjustable analog audio settings (volume, gain, balance)
- Daisy chain support
- Fixes EDID and keeps the source's output continuously active
- Advanced EDID Management
- Intuitive control software for device configuration
- Device control via USB
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- HDCP enable/disable function on input
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Mounting options for rack, furniture or truss
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- No signal latency, zero frame delay
- Input cable equalization up to 30m at 1080p60Hz (with 24 AWG high quality DVI/HDMI cable)
- Pixel Accurate Reclocking
- Built-in video test pattern generator
- Status LEDs for video and audio detection
- Frame Detector (analyze detailed video timings)
- External universal power adaptor
- Firmware upgrade through USB
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Resources & Downloads
Data sheets, manuals and resources for the HDMI-4K Manager
Interested in this product?
Our AV experts are ready to help you find the perfect solution for your project.
Quick Specs
- Data rate per TMDS channel:
- 3 Gbps
- Max resolution:
- 3840 x 2400 or 4096 x 2160
- Reclocking:
- Yes
- HDCP pass through:
- Yes
- Input cable equalization:
- Automatic max 20m @4k30, or 30m @1080p60
Technical Specifications
- Data rate per TMDS channel:
- 3 Gbps
- Max resolution:
- 3840 x 2400 or 4096 x 2160
- Reclocking:
- Yes
- HDCP pass through:
- Yes
- Input cable equalization:
- Automatic max 20m @4k30, or 30m @1080p60
- Digital audio formats:
- Pass through. Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats
- Front panel control:
- Yes, EDID learn button, EDID selector switch
- LED indicators:
- Live, Video Input Status, Audio Signal Format, Video Output Status
- EDID emulation:
- Yes, Advanced EDID management with 100 EDID memories
- EDID memory:
- 55 factory preset , 6 universal, 2 transparent, 37 user programmable
- EDID support:
- 256 byte Extended EDID
- +5V Power on HDMI Outputs:
- 500 mA
- Power:
- DC connector (1.35 / 3.5 mm)
- Power consumption:
- 1,8 W (max)
- Enclosure:
- 1 mm metal
- Dimensions:
- 100,4 W x 67,6 D x 26 H mm
- Net weight:
- 250g
- Warranty:
- 3 years
- CONNECTORS
- Input / Output:
- HDMI connector / HDMI connector
- Control:
- Mini USB-B female connector
The output signal is reclocked and stabilized using Lightware Pixel Accurate Reclocking technology to remove jitter caused by long cables or poor quality sources.
HDMI-4K Manager features Advanced EDID Management and can emulate any HDMI display for continuous video output, even if the attached display is disconnected or powered down. HDCP enable/disable function turns off the unit’s HDCP capability, which helps integrate certain laptops into a non‑HDCP AV environment. The EDID memories from 1 to 55 are factory preset, the memories from 62 to 98 are user programmable. EDID memories from 56 to 61 are for universal EDID presets. Memory 00 is transparent for output so using this setting the EDID of the last attached display device (monitor or projector) will be reported to the source. With the Easy EDID Creator (PC software wizard) the users can create their own EDID by completing four simple steps. Experienced users can use the Advanced EDID Editor software to manage every possible setting in the EDID, which can be uploaded to the user programable memory of the HDMI-4K Manager.
HDMI-4K Manager can be rack‑mounted or used standalone. The unit is equipped with the highest grade gold plated connectors to ensure reliable connection.
- Multiple powering options over DC plug, USB or HDMI 5V input
- Adjustable analog audio settings (volume, gain, balance)
- Daisy chain support
- Fixes EDID and keeps the source's output continuously active
- Advanced EDID Management
- Intuitive control software for device configuration
- Device control via USB
- Supports deep color signals (24/30/36 bit RGB/YCbCr 4:4:4)
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- HDCP enable/disable function on input
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Mounting options for rack, furniture or truss
- 1920x1080@120Hz/4:4:4, 4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- No signal latency, zero frame delay
- Input cable equalization up to 30m at 1080p60Hz (with 24 AWG high quality DVI/HDMI cable)
- Pixel Accurate Reclocking
- Built-in video test pattern generator
- Status LEDs for video and audio detection
- Frame Detector (analyze detailed video timings)
- External universal power adaptor
- Firmware upgrade through USB
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
| Data rate per TMDS channel: | 3 Gbps |
| Max resolution: | 3840 x 2400 or 4096 x 2160 |
| Reclocking: | Yes |
| HDCP pass through: | Yes |
| Input cable equalization: | Automatic max 20m @4k30, or 30m @1080p60 |
| Digital audio formats: | Pass through. Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats |
| Front panel control: | Yes, EDID learn button, EDID selector switch |
| LED indicators: | Live, Video Input Status, Audio Signal Format, Video Output Status |
| EDID emulation: | Yes, Advanced EDID management with 100 EDID memories |
| EDID memory: | 55 factory preset , 6 universal, 2 transparent, 37 user programmable |
| EDID support: | 256 byte Extended EDID |
| +5V Power on HDMI Outputs: | 500 mA |
| Power: | DC connector (1.35 / 3.5 mm) |
| Power consumption: | 1,8 W (max) |
| Enclosure: | 1 mm metal |
| Dimensions: | 100,4 W x 67,6 D x 26 H mm |
| Net weight: | 250g |
| Warranty: | 3 years |
| CONNECTORS | |
| Input / Output: | HDMI connector / HDMI connector |
| Control: | Mini USB-B female connector |
About Penguin Media Solutions
Penguin Media Solutions is a professional audio, video, and lighting design, installation, and maintenance company based in Brighton, UK. As an authorised Martin Audio dealer, we provide high-performance AV systems for commercial venues, hospitality, and event spaces across Brighton, London, and South-East England.
Pages
