Lightware DVI-OPT-RX220-Pro
DVI Multimode Fiber Optical Extender
Designed for rental and fixed use, DVI‑OPT-220‑Pro series extenders can transmit DVI‑D signals over multimode fiber cables up to a range of 2500 m.
View more products in the Extenders range 
Contact us for purchasing info
Specifications of the DVI-OPT-RX220-Pro
| DVI: | 29 pole DVI-I connectors (only digital pins are connected) |
| Fiber: | (ST version) ST connector |
| Power: | IEC connector |
| RS-232: | 9 pole standard D-SUB female |
| Warranty: | 3 years |
| CONNECTORS | |
| Data rate: | 1.65 Gbps per colour |
| Enclosure: | 1U half rack, 1 mm metal |
| Compliance: | CE |
| Dimensions: | 221 W x 181 D x 42.2 H mm |
| Resolution: | 640 x 480 to 1920 x 1200 |
| EDID memory: | 50 factory preset, 50 user programmable EDID in transmitter |
| Video delay: | 0 frames |
| EDID support: | 256 Byte Extended EDID v1.3 |
| Power supply: | Internal (100 to 240 V AC, 50/60 Hz) |
| EDID emulation: | Yes, Advanced EDID Management |
| HDCP pass through: | No |
| Laser wavelengths: | 4 ch. CWDM: 778; 800; 825; 850 nm (high speed) |
| Front panel control: | EDID management in transmitter |
| Optical loss budget: | 8 dB (worst case) |
| RS-232 pass through: | No |
| Remote power distance: | 600 m |
| Transmission distance: | 2500 m (using OM4 type fiber) |
| Net weight (receiver): | 1340 g |
| Transmitter output OMA*: | -6.25 dBm (worst case) |
| Alarm (only on receiver): | 3 pole |
| Net weight (transmitter): | 1420 g |
| LED indicators (receiver): | Power, laser detect, signal present, monitor connected |
| Laser class specification: | Class 3 |
| Receiver OMA* sensitivity: | -14.25 dBm (worst case) |
| LED indicators (transmitter): | Power, source connected, signal present, laser active |
| Power consumption (receiver): | 4 W |
| Power consumption (transmitter): | 3.5 W |
