Lightware HDMI-TPS-RX120-HDSR
HDBaseT™ Compatible HD Video Scaler and Receiver with Local HDMI Input
HDMI-TPS-RX120-HDSR is a TPS (HDBaseTTM) receiver with a local HDMI input and a built-in HD video scaler. Conversion between common formats and frame rates are supported. One common resolution can be used across the whole system configuration, independent of the requirements of the connected displays, which improves general performance. The connected display receives continuous HDMI signal from the scaler when a switching in the input signal occurs.
Description
HDMI-TPS-RX120-HDSR is a TPS (HDBaseTTM) receiver with a local HDMI input and a built-in HD video scaler. Conversion between common formats and frame rates are supported. The connected display sink receives continuous HDMI signal from the scaler even when a switching in the input signal occurs.
The unit scales any incoming resolution to fixed output resolutions of maximum 1920x1200@60Hz (RB) or FullHD 1920x1080@60Hz. It performs with low latency, providing visually seamless switching on output; HDMI, HDCP and DVI compliant, and allows connecting from 155 m in Long Reach Mode and 120 m in automatic mode. It also handles RS-232 for monitor control, Ethernet control, local hdmi input switching, optional IR remote controller for easy setup:HDMI-TPS-RX120-HDSR has a local HDMI input with a built-in switcher to select source, its configuration appears as OSD (On-Screen-Display) messages on the connected display, and can be adjusted using the front panel buttons.
The device is compatible with all HDBaseT compatible Lightware TPS transmitters and matrix switchers, its features include factory loaded EDID memory slots and Pixel Accurate Reclocking. This scaler can be controlled by the Lightware Device Controller software, which can perform any adjustment using a connected computer via RS-232.
The device can be used standalone or mounted on a rack, on truss, or a piece of furniture, it's rack ears are compatible with the VESA mounting standard. As an optional extra accessory, a remote controller is also available to control basic functions.
HDMI-TPS-RX120-HDSR Features
- Scaling of video signals to match the properties of the target display/sink
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
- HDCP 1.4 compliant
- TPS link quality and cable length monitoring
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Firmware upgrade through USB
- Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- HDBaseT compatible
- Ethernet extension (100 Mbps)
- Transparent EDID pass-through
- Pixel Accurate Reclocking
- Uncompressed video up to 6.75 Gbps datarate (225 MHz pixel clock)
- Device control via Ethernet (TCP/IP) and RS-232
- Multiple TCP/IP connections
- Intuitive control software for device configuration
- No video compression
- Bi-directional RS-232 and IR extension (pass-through and control)
- External universal power adaptor
- Mounting options for rack, furniture or truss
- Extends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
Applications for the HDMI-TPS-RX120-HDSR
Resources & Downloads
Data sheets, manuals and resources for the HDMI-TPS-RX120-HDSR
Interested in this product?
Our AV experts are ready to help you find the perfect solution for your project.
Quick Specs
- Maximum Resolution:
- 1920x1200@60Hz (RB), FullHD 1920x1080@60Hz
- Video latency
- 2-3 frames ( = 33 .. 50ms @ 60Hz )
- Audio latency
- 0ms, 40ms (default), 110ms, 150ms configurable
- Digital audio formats:
- Supports 2 channel PCM and AC3 5.1 formats
- (other formats are being tested & added)
- Rack mountable, removable rack ears
Technical Specifications
- Maximum Resolution:
- 1920x1200@60Hz (RB), FullHD 1920x1080@60Hz
- Video latency
- 2-3 frames ( = 33 .. 50ms @ 60Hz )
- Audio latency
- 0ms, 40ms (default), 110ms, 150ms configurable
- Digital audio formats:
- Supports 2 channel PCM and AC3 5.1 formats
- (other formats are being tested & added)
- Rack mountable, removable rack ears
- Input cable equalization:
- Automatic max 155 m (155 m LR, 120m HDBT)
- EDID emulation:
- Built-IN EDID
- EDID memory:
- No
- HDCP pass through:
- Yes
- RS-232 pass-through:
- Yes
- RS-232 (control option):
- 9600 (local or through TPS)
- Local power:
- 4-pole, DC 24V, 600mA
- Power over TPS:
- No
- Power consumption:
- 17W
- Dimensions:
- 160 W x 191.7 D x 30 H mm (LW case)
- Enclosure:
- 1 mm metal
- Weight:
- ~800 g / product (estimate)
- Compliance:
- CE
- Warranty:
- 3 years
HDMI-TPS-RX120-HDSR is a TPS (HDBaseTTM) receiver with a local HDMI input and a built-in HD video scaler. Conversion between common formats and frame rates are supported. The connected display sink receives continuous HDMI signal from the scaler even when a switching in the input signal occurs.
The unit scales any incoming resolution to fixed output resolutions of maximum 1920x1200@60Hz (RB) or FullHD 1920x1080@60Hz. It performs with low latency, providing visually seamless switching on output; HDMI, HDCP and DVI compliant, and allows connecting from 155 m in Long Reach Mode and 120 m in automatic mode. It also handles RS-232 for monitor control, Ethernet control, local hdmi input switching, optional IR remote controller for easy setup:HDMI-TPS-RX120-HDSR has a local HDMI input with a built-in switcher to select source, its configuration appears as OSD (On-Screen-Display) messages on the connected display, and can be adjusted using the front panel buttons.
The device is compatible with all HDBaseT compatible Lightware TPS transmitters and matrix switchers, its features include factory loaded EDID memory slots and Pixel Accurate Reclocking. This scaler can be controlled by the Lightware Device Controller software, which can perform any adjustment using a connected computer via RS-232.
The device can be used standalone or mounted on a rack, on truss, or a piece of furniture, it's rack ears are compatible with the VESA mounting standard. As an optional extra accessory, a remote controller is also available to control basic functions.
- Scaling of video signals to match the properties of the target display/sink
- HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant
- HDCP 1.4 compliant
- TPS link quality and cable length monitoring
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Firmware upgrade through USB
- Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable, 1920x1080p60)
- HDBaseT compatible
- Ethernet extension (100 Mbps)
- Transparent EDID pass-through
- Pixel Accurate Reclocking
- Uncompressed video up to 6.75 Gbps datarate (225 MHz pixel clock)
- Device control via Ethernet (TCP/IP) and RS-232
- Multiple TCP/IP connections
- Intuitive control software for device configuration
- No video compression
- Bi-directional RS-232 and IR extension (pass-through and control)
- External universal power adaptor
- Mounting options for rack, furniture or truss
- Extends DVI or HDMI 1.4 + Audio + Ethernet + RS-232 + IR over one CAT5/6/7 cable
| Maximum Resolution: | 1920x1200@60Hz (RB), FullHD 1920x1080@60Hz |
| Video latency | 2-3 frames ( = 33 .. 50ms @ 60Hz ) |
| Audio latency | 0ms, 40ms (default), 110ms, 150ms configurable |
| Digital audio formats: | Supports 2 channel PCM and AC3 5.1 formats |
| (other formats are being tested & added) | Rack mountable, removable rack ears |
| Input cable equalization: | Automatic max 155 m (155 m LR, 120m HDBT) |
| EDID emulation: | Built-IN EDID |
| EDID memory: | No |
| HDCP pass through: | Yes |
| RS-232 pass-through: | Yes |
| RS-232 (control option): | 9600 (local or through TPS) |
| Local power: | 4-pole, DC 24V, 600mA |
| Power over TPS: | No |
| Power consumption: | 17W |
| Dimensions: | 160 W x 191.7 D x 30 H mm (LW case) |
| Enclosure: | 1 mm metal |
| Weight: | ~800 g / product (estimate) |
| Compliance: | CE |
| Warranty: | 3 years |
About Penguin Media Solutions
Penguin Media Solutions is a professional audio, video, and lighting design, installation, and maintenance company based in Brighton, UK. As an authorised Martin Audio dealer, we provide high-performance AV systems for commercial venues, hospitality, and event spaces across Brighton, London, and South-East England.
Pages
